The most common air conditioning malfunction
With the advent of summer, high temperatures force us to resort to air conditioning. In fact, a home air conditioner has become an essential item in the face of increasingly hot summers.
In order not to suffer from heat, it is important to maintain the device properly. How to avoid damage and increase its useful life.
Here we will tell you what are the common air conditioning fault files that affect home appliances, how to detect them, and how to solve air problems.
Why does the air conditioner break down?
Refrigeration equipment malfunctions for various reasons. One of the problems that can cause failure of the air conditioner is improper use, for example, turning it on and off several times in a row; If the electrical connection is bad, the drains are poorly placed or not clean, the device may malfunction or be damaged.
My air conditioner is not cooling, what are the most common reasons?
Among the most common home air conditioner failures, problems are found from cooling , holes, failure to clean and replace filters. These are just some of the common air conditioning malfunctions that you can learn how to fix in a simple way.
Dripping or loss of water
One of the most common defects in home air conditioning equipment is water dripping or loss, and it can be of two types:
- In front of me
It occurs when there is a failure in installation and drainage. For example, when the hoses are higher and do not allow for the natural slope that allows drainage, water falls through the front of the machine.
- Heat exchanger or coil
Water dripping from this element is completely normal during operation.
Doesn't get cold
It often happens that the device does not cool down, even if it is at the lowest possible temperature. These faults are called cooling faults and can occur for reasons such as lack of gas or problems with dirty or damaged filters.
It is common to recharge gas to refrigeration equipment, and it is important to check whether the lack of gas is due to a puncture in the hoses of the equipment or just because it has been used for a long time.
Filters can become dirty or damaged and are one of the most common causes of cooling failure.
Compressor problems
The compressor is an essential piece of refrigeration equipment and is also one of the air conditioning faults why people often see a specialist. Compressor problems are usually due to the following reasons:
The compressor must heat in inverse proportion to that cooled by the evaporator.
If the compressor does not turn on and makes no sound, make sure it is receiving power.
It may happen that the condensing pressure system is in poor condition or not well regulated.
Electrical connections
Strangely enough, it is very common to see among common air conditioning malfunctions problems with the installation of electrical connections. It is important that it is performed by a professional to avoid serious accidents. Cables must be at least 6 mm thick and must have regulating insulation.
What are the possible solutions to air conditioner malfunctions?
Air conditioning failure can become a headache, because the use of these devices is necessary in times of high temperatures. In addition, if it is not fixed properly or on time, it can become a major failure that ruins the entire team.
We leave some possible solutions to the most common problems we mentioned in this article:
If dripping or loss of liquid occurs from the front, always check the inclination of the hose or the water removal tray, which should be at an angle that favors drainage according to the law of gravity.
When the device does not reach the required cold, it is necessary to determine if there are any type of cracks or openings that facilitate gas loss.
- Filter problems
To solve problems with the filters, you must open the compartment in which the filters are located and remove it. Some kits contain reusable filters that can be cleaned and replaced, while others require the purchase of a replacement, and either way, the filters are usually easy to install.
Compressor problems
When the compressor does not heat up it is because the evaporator is not cooling. This may be due to a gas leak and in this case, it should be repaired to continue charging new refrigerant.
If the compressor does not turn on, it is suggested to check the entire electrical connection, from inside the device, to the wall outlet where it is plugged.
In the absence of pressure, it is recommended to perform pressure measurement tests and repair or installation according to the results obtained.
Regarding electrical connections, always check the cables with a professional electrician and reinstall the cables correctly.
If you want to read articles similar to the article on the most common air conditioning malfunctions
Follow us on the Jaafar Shop blog
اترك تعليق او سؤال