
How to get rid of moisture and mold from the walls?
One of the most common problems affecting homes is the problem of water leakage, which leads to the formation of fungi and mold on the walls.
In this guide presented by Jaafar Shop, we will learn about the nature of mold and moisture formation and how we can get rid of them.
• Why does wall mold occur?
There are many reasons why wall mold occurs.
1. During the winter, we all close doors and windows almost all the time. As a result of this behavior, your home does not get adequate ventilation.
Poor ventilation of the house, especially in the winter, leads to mold in the walls. Winter is characterized by humidity and mold in most homes due to poor ventilation.
The kitchen and bathroom are the places most affected by wall mold. Most people pay attention to the ventilation of areas such as the living room and guest rooms and do not pay enough attention to the kitchen and bathroom.
The solution is simple. All you have to do is expose the rooms to regular ventilation. The fresh air will keep out moisture and thus prevent mold formation.
2. Most people tend to stick the furniture tightly to the wall and not leave any spaces between them. This movement is completely wrong and leads to the formation of mold and fungi as a result of constant friction between the furniture and the wall.
Also, the wall adjacent to the foundation does not receive sufficient ventilation, which leads to the formation of fungi and mold.
3. There are many routine things we do that lead to mold formation. For example, we spread clothes without wringing them well, which leads to water in the clothes leaking onto the facades of buildings.
Also, not paying attention to cleaning the bathroom well and leaving water to settle on the ceilings and walls without ventilation.
• How do you get rid of moisture and mold formed on ceilings and walls?
Wall mold is extremely dangerous to the family's health, in addition to distorting the aesthetic appearance of the home's walls, causing serious damage to home designs and decorations.
Mold is a bacteria characterized by its ability to attract other types of germs and bacteria that are capable of forming on mold bacteria. The end result is a lot of germs and dirt on the walls.
Getting rid of wall mold is an absolute must. Follow the tips and steps below to get rid of wall mold easily.
1. Insulate roofs and walls well. Insulation prevents moisture and protects the walls from any leakage or mold formation. You can browse our articles to learn how to insulate internal surfaces and walls. You can also browse all the insulation products you may need from here .
2. Paint the walls with mold- and moisture-resistant paints.
3. There are moisture-preventing devices that are effective in preventing and eliminating wall mold and moisture and eliminating mold-forming bacteria. It is best to place these devices in the kitchen, bathroom, and rooms that are not well ventilated, as they are most susceptible to mold and moisture.
4. Clean the walls with strong and effective cleaning liquids. Chlorine is considered one of the most effective chemical liquids capable of eliminating bacteria and fungi. For best results, mix equal amounts of bleach, vinegar, and water, put the mixture in a spray bottle, and spray the areas most likely to develop mold.
The kitchen and bathroom are the most exposed to water, and therefore they must be constantly sprayed with a mixture of vinegar and chlorine, then dry the walls well.
Wear gloves while cleaning the walls with this mixture so that your skin is not affected.
5. Salt is also a powerful substance available in all homes that can eliminate dirt and mold. Dissolve a bag of salt in an appropriate amount of water and spray the areas most susceptible to moisture and mold. Clean the walls well using a dedicated brush. It is best to wear gloves while spraying and cleaning the walls so that your skin is not affected.
Following these tips is necessary to prevent and get rid of moisture and mold, especially in the winter. You can get all the products you need to complete the mold elimination process through Jaafar Shop .
اترك تعليق او سؤال