8 ways to clean cement used in ceramics with guaranteed effectiveness!

After a home is built or renovated, cement residue usually sticks to the tiled floor. Therefore, you should know how to clean the cement used on ceramic tiles and it is effective so that the house looks clean.

When building or renovating a house, ground work often leaves cement on the ceramic surface.

These stains are easier to clean if the cement is still wet, but will be more difficult when the cement dries.

Cement residue in ceramics also makes people who step on them feel uncomfortable.

Because the ceramic surface will be specific and uneven.

Besides being uncomfortable, of course the floor of the house looks less elegant and beautiful, right?

To overcome this, let's look at how to clean cement marks on ceramics next:

10 ways to remove cement marks on ceramic

1. Use baking soda

Baking soda or baking soda is one of the most effective ingredients for removing cement marks on ceramic.

In fact, other stubborn stains will be removed with baking soda.

There are two ways you can do to clean cement marks on ceramic using baking soda.

First sprinkle baking soda powder directly on the cement and leave it for some time.

Then clean the sprinkled floor with baking soda until the stain is gone.

Second, dip a cloth or sponge into the baking soda bowl.

Then rub the ceramic area with a sponge on the ceramic area that has traces of cement.

When finished, rinse using warm water until the ceramic is clean again.

2. Pour in the vinegar liquid

The second way to clean cement marks on ceramic is to use vinegar.

Just like baking soda, you can use two methods.

First, spray vinegar directly onto the cement-stained area of ​​the floor.

Next, let's stand a few moments and wipe off the cement residue.

Second, mix the vinegar solution in a spray bottle filled with water.

Once mixed, spray the solution onto the cement surface and rub gently.

3. Apply lemon juice

It is known that lemon water contains a high percentage of acids, so it is effective in removing cement marks on ceramics.

The trick is, just apply lemon juice to the cement surface on the floor and leave it for a while.

Next, clean the remaining cement with a mop or broom on the tile floor in the house.

However, you also need to be careful when using lemon because its high acid content can also cause damage to ceramics.

4. Sprinkle salt

Another way to remove cement marks on ceramic is to use salt.

The application method is easy, just sprinkle salt on the previous cement.

Next, leave the salt overnight and brush it with a ceramic brush or sponge.

If the remaining cement on the floor is still visible on the first attempt, repeat this method several times until the ceramic surface is completely clean.

5. Make use of the rest of the grated coconut

Leftover grated coconut can also be used to remove traces of cement on the tile floor.

You just need to rub the coconut dregs on the cemented ceramic surface.

Then, like the others, let the coconut pulp soak for a while.

Next, clean again with a mop, floor brush or sponge until the remaining cement is completely gone and clean.

6. Apply HCL solution

HCL solution or hydrochloric acid can also be used to remove traces of cement on ceramics.

To apply it, simply mix the solution in a bucket filled with water.

Next, mix a few tablespoons of hydrochloric acid.

The very high acid content in HCL can damage the floor surface if used too often.

It's also a good idea to wear gloves when rubbing the solution onto the cement.

7. Use hydrogen peroxide

Hydrogen peroxide is a strong chemical used to remove cement marks on ceramics.

Before applying this ingredient, hydrogen peroxide must be mixed with white flour.

This is customized, so that the liquid hydrogen peroxide coagulates and turns into a paste.

After forming it into a paste, apply the material to the ceramic area affected by the cement until it is completely covered.

Leave it overnight then rinse it with cold water the next day.

8. Clean ceramic floors carefully

Regular cleaning of tile floors is also a way to remove cement marks on ceramic tiles.

Ceramic should be swept or mopped regularly so that the remaining cement is eroded.

It will also keep the ceramic surface clean and shiny.