How to choose the right tree/firewood saw
How to choose the right tree/firewood saw
The first step to choosing the right tree/firewood saw is to know your needs for this tool. The tree/firewood saw is used by homeowners, farmers, and professionals who cut trees and firewood
If the saw is used at home and for very simple purposes, then the most suitable saw for that is the electric saw. However, if the use is permanent and in areas far from any electrical power source, then the appropriate saw is the gasoline saw.
One of the most important factors that determine whether the saw runs on electricity or gasoline is the type of firewood to be cut. If the wood is hard, such as walnut, oak, or beech, then a gasoline saw is most suitable for that.
The use of a tree/firewood saw is usually widespread in the fall and winter seasons, and it is available in different sizes. There is a saw with a blade length of 14 inches, and there are 16 inches, 18 inches, and 20 inches.
To determine the appropriate length of the blade, you must take into account that the length of the blade is determined by the piece of wood or tree to be cut. If the goal is to cut a piece of firewood, it is preferable to add 2 inches to the length of the wood to be cut. For example, if the wood piece is 14" long, you will need a 16" length. The following table shows the most appropriate use for each strain:
|
Breed length |
Whatever work suits her |
|
12" - 14" |
Pruning and cutting small branches |
|
16" |
Cutting small trees |
|
16"-18" |
Cutting medium trees |
|
14" - 16" |
Light firewood chopping |
|
16"-18" |
Chopping medium firewood |
|
18" and more |
Big trees |
How to prepare the saw?
1- All chainsaws arrive from the factory without being filled with oil or gasoline
2- The gasoline tank is filled with gasoline and oil in a ratio of 20:1 (for every 20 liters of gasoline there is 1 liter of oil).
3- The oil used is regular car oil 10:40
4- The pump tank must also be filled with oil
Before starting the use process, you must consider the following:
1- Make sure that there is an outlet and space to escape when cutting a tree so that it does not fall on you
2- Be fully prepared for the cutting process by wearing protective glasses, a work helmet, general safety shoes, protective gloves and ear protection.
3- You must pay attention to the dangerous area in the blade, which is shown in the picture in red, not to touch the ground or anything, and not to cut from this area.
التعليقات
اترك تعليق او سؤال