How to keep kitchen chairs from dirt?

Kitchen chairs are among the chairs most exposed to dirt, and to preserve them we recommend covering them with a thick nylon cover, or replacing the old one if it is damaged. In either case, you do not need a specialist to do this, as the process is very simple, and is summed up in the following steps:

Required tools:

1. Thick nylon.
2. Scalpel or scissors
3. Upholstery individual
4. Screwdriver

Installation method:

1. Turn the chair over and look at the seat from the bottom. You will find screws. Unscrew those screws to remove the base (seat) from the chair.
2. Place the seat on the nylon, so that the area of ​​the cut nylon is larger in circumference than the base of the chair.
3. After cutting the nylon, we fix one end of the nylon by folding it over the bottom of the seat, and then we move to the next side (not the opposite one) and fix it with the upholstery.
4. We tighten the opposite side and start placing staples by straightening the upholstery.
5. After ensuring that the nylon is well stretched, reinforce the fixation by straightening the upholstery, but make sure that the exposed side does not have any other protrusions.
6. Trim the excess from the plastic cover.
7. Replace the chair base and then secure it with the screws that were originally on it.