Tile tiles for ponds and swimming pools
Jafarshop guarantee
🚚 Free delivery for any order over 20 dinars (limited period)
✅ All products are guaranteed by the agent’s warranty
🔄 Easy and free return
🛒 More than 30 thousand products
Product Name : Robe tiles for pools
Deco Grout UW - Cementious tile grout for swimming pools
Product Description:
Decorete pool cement tile grout powder is a ready to use colored polymer modified cement for paving swimming pools and flooded areas.
Uses:
Tile grout is used as a joint filler for tiles, bonding them perfectly with the matching trim color
Particularly suitable for swimming pools, fountains, kitchens, bathroom tiles and any areas flooded with water.
Advantages :
- Tile grout is ready to use.
- High bonding strength.
- Good water resistance.
- Resistant to fungal and algae growth.
- A variety of colors available.
Application:
Preparing the spacers:
All surfaces must be intact and clean before applying Deco Grout SP. All traces of grease or oil should be removed using a chemical degreaser. All damaged particles and any other contaminants must be removed.
Deco Grout SP can be applied 24 hours after laying the tiles.
Mixture :
7 liters of potable water per 25 kg bag of Deco Grout SP Slowly add the powder to the water using a slow speed mixing auger fitted with a mixing paddle, until a homogeneous consistency of the mixture is achieved.
Application method:
Moisten the tiles slightly with a clean, damp sponge before tiling.
Spread the mixture on the surface of the tiles using a rubber putty knife. Do this back and forth at a 45 degree angle to the tile surface to ensure the joints are completely filled.
Remove excess mixture by holding the rubber putty knife at a 90-degree angle running diagonally across the tile.
After 15-30 minutes, wipe away the remaining excess with a wet sponge until the tiling is smooth and uniform.
Packing:
25 kg bags.
Coverage area:
|
Tile size (Centimeter) |
1 mm |
2 mm |
3 mm |
4 mm |
5 mm |
6 mm |
|
10 |
1.5 |
1 |
0.7 |
0.5 |
0.45 |
0.35 |
|
20 |
3 |
2.2 |
1.5 |
1.25 |
1 |
0.8 |
|
25 |
3.5 |
2.5 |
1.8 |
1.5 |
1.2 |
0.9 |
|
20 |
4 |
3 |
2.2 |
1.8 |
1.5 |
1 |
|
30 |
5 |
4 |
3 |
2 |
1.7 |
1.5 |
|
30 |
6.5 |
5 |
3.5 |
2.5 |
2 |
1.75 |
|
40 |
8 |
6 |
4 |
3 |
2.5 |
2 |
|
50 |
10 |
8 |
6 |
4 |
3 |
2 |
expiry:
Unopened bags can be stored for up to 12 months in a cool, dry, weatherproof environment. Bags should be stored off the ground.
Cleaning:
Remove excess adhesive with a damp cloth before the material sets.
Contraindications for use:
- Do not install control or expansion joints.
- Color development may vary depending on tile type, temperature, humidity and cleaning methods.
- Decorete recommends using Deco Bond SBR mixed with water for outdoor applications subject to snow-thaw conditions.
Product technical specifications:
Hardening time/viscosity: 1 hour at 25°C
Preparation time: Initial layer from 1 to 3 hours
The final layer is 3 to 8 hours
Compressive strength: 15 MPa in 28 days
Adhesion strength: 2.5 MPa in 28 days
safety precautions:
This product is non-toxic but contains cement. Use good occupational health and safety practices to avoid direct contact.
Decorete recommends using dust masks, eye protection and wearing gloves when handling this product.
To communicate:
For more information on this product or advice on application, please contact our Technical Consulting Department.
Warranty (Disclaimer):
Include @Decorete fully distributes its products when used and applied in strict accordance with printed instructions regarding mixing and application of the product. In any case, you should not exceed your responsibility Decorate® Either refund the purchase price, or exchange the purchased product.
keep away from the reach of the children