Skip to content
special offer! Enjoy free delivery on any order over 20 dinars. 🚚💰
special offer! Enjoy free delivery on any order over 20 dinars. 🚚💰

High insulation WB water based glass

Save 14% Save 14%
Original price 60.000 JOD
Original price 60.000 JOD - Original price 60.000 JOD
Original price 60.000 JOD
Current price 51.650 JOD
51.650 JOD - 51.650 JOD
Current price 51.650 JOD
Purchase order - for large quantities and companies

Jafarshop guarantee

🚚 Free delivery for any order over 20 dinars (limited period)

✅ All products are guaranteed by the agent’s warranty

🔄 Easy and free return

🛒 More than 30 thousand products

Product Name: Water-based water repellent material

Deco Guard WB - Water base silane/siloxane water repellant

Product Description:

Deco Guard WB is a water-based, water-repellent mixture of silane and siloxane.

Deco Guard WB acts as a high quality general purpose water repellent for impregnating and priming metal surfaces

Deco Guard WB reduces pipe suction, but does not clog the pipe duct. Therefore there is little or no impairment in the ability of building materials to “breathe/ventilate”.

Uses :

Deco Guard WB is an excellent water repellent for many absorbent mineral substrates, such as:

  • Natural and artificial stone
  • Brick
  • Fiber cement boards
  • Plasters and makes them
  • Fiber cement

Deco Guard WB is not suitable for dense and less absorbent natural stone, especially limestone, marble and reinforced concrete for bridges and roads.


  • A friend of the environment
  • Good penetration depth.
  • High resistance to alkalis.
  • Effective even on wet substrates
  • Allows the substrate to breathe
  • Provides good adhesion to paints and reduces florescence, flaking and cracking


Immersion, preferably not under pressure, is the best technique for applying Deco Guard WB. Apply several coats, wet on wet, until the bottom coat is saturated. In general, at least two coats are sufficient for all substrates.

Best results are obtained by applying Deco Guard WB to clean, dry substrates. As a standard procedure, fresh concrete should be allowed to dry for 28 days before application. All resets must be completed and allowed to cure for at least 3 days. Concrete repair and replacement must be completed prior to application.

Before applying Deco Guard WB be sure to cover windows and other non-absorbent surfaces properly as the product cures and dries quickly so it is very hard. If it becomes difficult to remove, wipe up any stains on window panes immediately, using a solvent if necessary.


Deco Guard WB Available in 18 liter plastic pail


Deco Guard WB has a shelf life of at least 12 months from the date of manufacture when stored between 0°C and 35°C in the tightly closed original container. The container must be protected from sunlight.


The consumption and effectiveness of Deco Guard WB varies according to the type of substrate and should only be determined on site by testing a small area of ​​the material to be treated.

Technical data:


The appearance

Approximately 25% of the weight

Effective Material

[g/cm³] 0.95

Density at 25°C, approx

almost. 12 MPa

Dynamic viscosity at 25°C

safety precautions:

Deco Guard WB is non-flammable. Deco Guard WB should be kept closed when not in use and should be stored at temperatures below 40°C.

Avoid contact with skin and eyes. If skin contact occurs, wash the affected area immediately with soap and water.

كيف يمكننا المساعدة؟