Vaker water glass water based

Vaker Product Name : Water-based water-repellent material

Vaker Deco Guard - Water base acrylic sealer for plaster

Origin: Germany

Product Description:

Deco Guard AR is a water-based acrylic compound formulated to cure fresh paint and provide protection against the elements.

Deco Guard AR reduces water absorption by 80% unlike untreated surfaces and improves stain resistance.

Deco Guard AR binds sand and cement particles to form a tough, flexible layer that is well exposed to air.

Deco Guard AR strengthens joints between tiles, reduces efflorescence on bricks and also replenishes color on old painted or stained surfaces.

Uses :

Deco Guard AR can be used for the following applications:

• Top coat for all architectural coatings
• Insulator for building and concrete primary layers.
• Indoor and outdoor application.
• All locations where good weather resistance is required.

Advantages :

• Cures fresh paint without the need for water
• Significantly reduce water absorption.
• Protects against the carbonation process of cement/concrete
• Resists the growth of mold and fungi
• Excellent in color retention
• Durable and durable
• Well ventilated
• Excellent resistance to dirt pick-up.
• Provides excellent freeze/thaw stability and resistance to weather changes

Warnings and contraindications for use:

• Do not use when ambient, surface and material temperatures are below 5°C during the application and curing period
• Protect the used product from moisture, standing water and inclement weather until it dries completely.
• *Not recommended for application on floors
• Do not use in underground construction work. Under hydrostatic pressure, water may penetrate the treated surface
• Physical properties:
  

Repainting: wet to dry

Appearance: Milky white

Viscosity: 130 cps

pH level: 6.7

Flowering resistance: moderate

Coverage:

Deco Guard AR can be diluted at a ratio of 1:2 with water, which is equivalent to covering 150 square metres.

Note: Coverage rates are theoretical and for estimation purposes only, it is recommended to conduct a field test to determine coverage rates and number of layers required.

Application:

Surfaces to be treated must be dry, clean, sound and free of ice, snow, dew, frost and all dust, dirt, oil, grease and other harmful substances.

Cracks, loose tiles and damaged surfaces must be repaired before applying Deco Guar AR.

Stir/mix Deco Guard AR well before each use.

Apply Deco Guard AR by roller, brush or low-pressure sprayer. Avoid applying too much sealer in one layer. Avoid drips or lines caused by excessive application in one area.

Allow the first coat to dry for about two hours, then apply a second thin coat following the instructions in step one.

Packaging:

Deco Guard AR Available in 5 and 18 liter pail

Storage:

Store in cool, dry conditions away from direct sunlight. When properly stored, Deco Guard AR remains usable for approximately one (1) year.

safety precautions:

This product is non-toxic but contains cement. Use good occupational health and safety practices to avoid direct contact.

Decorete recommends using dust masks, eye protection and wearing gloves when handling this product.

To communicate:

For more information on this product or advice on application, please contact our Technical Consulting Department.

Warranty (Disclaimer):

@Decorete fully warrants its products when used and applied in strict accordance with printed instructions for mixing and applying the product. In any event, Decorete ®'s liability shall not exceed either the refund of the purchase price, or the replacement of the product purchased.

keep away from the reach of the children